BendBox

DESCRIPTION

The BendBox module is similar to the BoundBox module used for bounding lattice data except that it allows more direct control of the bounding box produced and produces a pyramid, similar to the WorldMap module, which can be used with the Projector module so that it is transformed in the same manner as the data. All points are given the data number 99, the same as the grid lines produced by the WorldMap module so that they will be the same color when a colormap is applied. In order to achieve better results when used with Projector, lines which run in the x and y directions are broken every 1 unit. This allows Projector to bend the lines properly.

INPUTS

WIDGETS

Port: X Grid
Type: Option Menu
Menu Item: None
Menu Item: Full
Menu Item: Ticks
The X/Y/Z Grid option menus determine if and how grid lines will be drawn around the perimeter of the box. If None is selected, no lines will be drawn in that particular direction. If Full is selected, lines will be drawn completely around the box. If Ticks is selected, short lines will be drawn in the corners.

Port: Y Grid
Type: Option Menu
Menu Item: None
Menu Item: Full
Menu Item: Ticks
The X/Y/Z Grid option menus determine if and how grid lines will be drawn around the perimeter of the box. If None is selected, no lines will be drawn in that particular direction. If Full is selected, lines will be drawn completely around the box. If Ticks is selected, short lines will be drawn in the corners.

Port: Z Grid
Type: Option Menu
Menu Item: None
Menu Item: Full
Menu Item: Ticks
The X/Y/Z Grid option menus determine if and how grid lines will be drawn around the perimeter of the box. If None is selected, no lines will be drawn in that particular direction. If Full is selected, lines will be drawn completely around the box. If Ticks is selected, short lines will be drawn in the corners.

Port: X Spacing
Type: Text
Spacing in the X direction

Port: Y Spacing
Type: Text
Spacing in the Y direction

Port: Z Spacing
Type: Text
Spacing in the Z direction

Port: X Min
Type: Text
Minimum X

Port: X Max
Type: Text
Maximum X

Port: Y Min
Type: Text
Minimum Y

Port: Y Max
Type: Text
Maximum Y

Port: Z Min
Type: Text
Minimum Z

Port: Z Max
Type: Text
Maximum Z

OUTPUTS

Port: Box
Type: Pyramid
Constraints: n-layer.
optional-baseLat.
n-D compression.
n-compression type.
Output pyramid of lines.

BendBox

DESCRIPTION

INPUTS

WIDGETS

OUTPUTS

PROBLEMS

SEE ALSO